Aster Quad
The Aster Quad is a recessed low level light in the Aster range, with three interchangeable faceplates, including the Aster Quad, Aster Ray and Aster Tilt. This fitting is suitable for interior use in hallways, stairs, bedrooms, and primary living areas, providing gentle path lighting.
SPECIFICATIONS
Power: 1.5W
Lumen Output: 100lm
Colour Temperature: 3000k
Beam Angle: N/A
Input: 24V
Adjustability: Fixed
Cut Out: 76mm x 76mm (with wall box).
IP Rating: IP22
Wiring Info: Low voltage to fitting, driver remote. If more than one fitting, wire in parallel.
Depth: 19mm (without wall box), 48mm (with wall box).
Notes: Optional wall box for concrete or block wall.
FINISH OPTIONS
White
Black
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
WIRING INFORMATION
DRIVER OPTIONS
-
• 36W/24V Driver - Remote Driver
• 75W/24V Driver - Remote Driver
-
• 36W/24V DALI Driver (Dimmable) - Remote Driver
• 75W/24V DALI Driver (Dimmable) - Remote Driver
Constant Voltage 24V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.