Stella Mini + Hood
The Stella Mini + Hood is a mini low level wall light with an antique brass finish in LA Lounge’s Dark Range of external fittings. This fitting is suitable for interior and exterior path and ambient lighting.
Our brass luminaires are suitable for all climates, including coastal environments. Brass exposed to the elements will oxidise over time to create a patina and a darker finish. This is a natural process and does not compromise the structural integrity.
SPECIFICATIONS
Power: 1W LED
Lumen Output: 100lm
Colour Temperature: 3000K
Cut Out: Ø18mm
Depth: 36mm, allow for canister.
Adjustability: Fixed
CRI: 80
IP Rated: 67
Wiring Info: Low voltage to driver.
Input: 12V
Beam Angle: 25°
Dimming: No
Warranty: 7 year 'structural' warranty.
FINISH OPTIONS
Antique Brass
PRODUCT GALLERY
DOWNLOADS
WIRING INFORMATION FOR 350mA VERSION
Constant voltage 12V drivers must be wired in parallel. See below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
-
• 36W/12V Driver (Non-Dimmable) - Remote Driver
• 75W/12V Driver (Non-Dimmable) - Remote Driver
-
• 36W/12V Driver & DALI Relay (Non-Dimmable) - Remote Driver
• 75W/12V Driver & DALI Relay (Non-Dimmable) - Remote Driver
