Alpha Two
The Alpha Two is an external antique brass up & down wall light, crafted from solid brass. This fitting is ideal for highlighting architectural features and providing general and path lighting.
Our brass luminaires are suitable for all climates, including coastal environments. Brass exposed to the elements will oxidise over time to create a patina and a darker finish. This is a natural process and does not compromise the structural integrity.
SPECIFICATIONS
Power: 2x 5W 12V DC MR16. 2x 5W 240V GU10 LED, requires Earth (on request).
Lumen Output: 540lm (2x 270lm).
Colour Temperature: 3000K
Cut Out: Surface Mounted
Depth: 85mm
Adjustability: Fixed
CRI: 80
IP Rated: 65
Wiring Info: 12V: Low voltage to driver. 240V: (On request) 240V to fitting. Input: 12V (240V on request).
Beam Angle: 120°
Dimming: TBC (12V only).
Warranty: 3 years.
Finishes: Antique brass. (On request): Antique brass, stainless steel, white, black or copper.
FINISH OPTIONS
Antique Brass
PRODUCT GALLERY
DOWNLOADS
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
• 150W/12V Driver (Dimmable) - Remote Driver
• 240W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION
Constant voltage 12V drivers must be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
